Numatic NX 300 Traduction Du Manuel D'utilisation D'origine page 27

EN
Handle Height Adjustment
A
Fitting and Locking the Batteries
Open the battery door (A).
Make sure Battery locks are open (B) and
insert both fully charged batteries (C).
Secure the batteries into the machine
using the battery locks (D) before closing
the battery door
Note: it is important to make sure
battery locks are fully engaged before
operating or moving your TTB3045NX/
TTB3045-R
Machine Set-up Guide
Using the handle position lever, lower the handle to a comfortable working position.
!
Do not operate machine unless the Operator Manual has been
The machine is now ready to be moved to the
cleaning site.
Before performing the cleaning operation, place out
appropriate warning signs and sweep or dust-mop the
floor.
A
C
27
27
B
IMPORTANT
read and fully understood.
B
D
!