Stihl iMOW 6.0 EVO Notice D'emploi page 60

English
connections. If the docking station, power sup‐
ply, connecting cable, charging cable or their
plug connections are not cleaned correctly,
components may no longer function properly
or safety devices may be rendered inopera‐
tive. People may be seriously injured.
► Disconnect the power supply's mains plug
from the wall socket.
► Clean the docking station, power supply,
connecting cable, charging cable and their
plug connections as described in this User
Manual.
■ If the robot mower, docking station or power
supply are not serviced or repaired correctly,
components may no longer function properly
or safety devices may be rendered inopera‐
tive. There is a risk of serious or fatal injury.
► Do not service or repair the robot mower,
docking station and power supply yourself.
► If the robot mower, docking station or power
supply require servicing or repairs: Contact
a STIHL authorized dealer.
► Maintain the blades as described in this
User Manual.
■ The user can be cut by the sharp cutting
edges of the blades while cleaning or servicing
the mowing unit. This may result in injury to
the user.
► Wear work gloves made of robust material.
■ If the power supply's connecting cable is faulty
or damaged:
► Replace power supply.
■ If the plug of the diagnostic socket on the bot‐
tom of the robot mower does not fit correctly,
moisture and dirt can penetrate the robot
mower. The robot mower may be damaged.
► Check the fit of the plug during each clean‐
ing and blade change.
► Do not operate the robot mower with a
missing or damaged plug.
5 Description of Operation
5.1 Functional Description
1
The robot mower mows the grass in randomly
selected paths. It is necessary to route a perime‐
60
3
2
ter wire (1) so the robot mower can identify the
boundaries of the mowing area.
The perimeter wire (1) transmits a signal to the
robot mower. The signal is generated by the
docking station.
The robot mower identifies fixed obstacles (2) in
the mowing area using ultrasound sensors and a
bump sensor.
If the robot mower identifies a fixed obstacle (2),
it will slow down, bump into the fixed obstacle
and then continue to move in a different direc‐
tion.
Areas (3) the robot mower must not navigate and
obstacles it must not come into contact with must
be blocked off from the remaining mowing area
with the help of the perimeter wire (1).
If the robot mower identifies a blocked-off
area (3), it will slow down and then continue to
move in a different direction.
In mowing operation, the robotic mower leaves
the docking station by itself and mows the lawn.
The robotic mower is operated by the
®
MY iMOW app and the buttons in the control
panel on the robotic mower. Light strips and the
matrix display on the robotic mower as well as an
artificially generated voice output provide infor‐
mation about the current status of the robotic
mower.
4
If the battery's state of charge is low, the robotic
mower will search for the nearest guide wire (4)
during the mowing operation. If a guide wire (4)
is recognized, the robotic mower will return to the
docking station by itself. The docking station
recharges the battery. At least one guide wire (4)
must be installed in the mowing area. A maxi‐
mum of three guide wires can be installed. If the
mowing operation is canceled or the battery must
be charged, the robotic mower can be sent
directly back to the docking station using the
®
MY iMOW app or HOME pushbutton.
5 Description of Operation
0458-012-9601-A