Stihl iMOW 6.0 EVO Notice D'emploi page 51

3 Overview
2 Connecting cable
The connecting cable connects the power
supply to the mains plug.
3 Power supply
The power supply supplies the docking sta‐
tion with energy.
4 Charging cable
The charging cable connects the power sup‐
ply to the docking station.
5 Plug
The plug connects the charging cable to the
docking station.
6 Hood
The hood covers the docking station and pro‐
tects the internal electronics.
7 LED
The LED indicates the status of the docking
station.
8 Charging contacts
The charging contacts connect the docking
station with the robot mower.
9 Base plate
The base plate is the base for the docking
station.
10 Cable duct
The guide wire is routed in the middle cable
duct.
11 Cable duct
The perimeter wire is routed in the outer
cable ducts.
# Rating plate with the machine number
12
12 Ground peg
The four ground pegs secure the docking sta‐
tion to the ground.
0458-012-9601-A
3.5 iMOW Ruler and Installation
®
Kit
®
iMOW Ruler
1
1 iMOW
®
Ruler
The ruler makes it easier to install wires and
serves to maintain the correct distance.
Installation Kit
An installation kit is required to commission the
robot mower; it is not included in the scope of
delivery of the robot mower. Appropriate installa‐
tion kits are available as accessories for different
garden sizes.
1
2
3
1 Fixing pin
The fixing pin secures the perimeter wire and
guide wire to the ground.
2 Wire connector
The wire connector connects wire ends to
each other.
3 Cable markers
The cable markers serve to mark wire ends
on the inside of the docking station. They
facilitate the assignment of the wire ends
when connecting to the correct terminal.
4 Wire coil
The wire coil is required to install the perime‐
ter wire and guide wire.
3.6 Symbols
Meanings of symbols on the robot mower, dock‐
ing station, power supply or installed battery:
This symbol shows the diameter of the
blade disk.
English
4
51