Loading The Pedelec / Braking Response; Proper Use Of The Pedelec - Crosswave ED-3.2 EX Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

When?
Servicing / check
After approximately
Check the tightening torque
100 km and
of screws, cranks, pedals,
subsequently at least
handle bar, seat support and
1x per annum
seat. Adjustment of gear,
control set, spring elements
and brakes. Check the wheels
and tyres
After every ride
Check the rims, spokes, tyres,
bell, brakes, quick release,
lights and the function of the
gear and springs
Regularly after
Check the cranks, sprocket
300–500 km
wheel and pinion. Check
chain wear and tear, stability
of all screws, wear indication
on the rim
After 1000 km
Back pedal brake, VR-HR
hubs
After 3000 km
Control set, pedals, hubs,
brake and control wires*)
After rain
Chain, wiring
* Do not oil Teflon coated cable jackets!
82
Loading the Pedelec
Action
– The permissible total load (rider and luggage) on the
Customer Service,
CROSSWAVE Pedelec is 120kg.
Service Department
– The permissible load of the luggage carrier is mentioned on
or specialized
the luggage carrier.
workshop
– If your cycle is equipped with a front basket, the additional
load allowed here is 5kg.
Braking response
– Use the front wheel brake carefully on wet, sandy and slippery
Check the rims for
concentricity and
roads, wet asphalt and ice, to keep the front wheel from
wear marks. Check
skidding and to retain the Pedelec under control!
tyres for foreign
– The brakes must be used with care. Blocked wheels have
bodies
a reduced braking effect and can lead to loss of balance
Clean and apply
and fall!
chain grease
– As a matter of principle, do not apply the brakes in curves
but before them; braking increases the risk of skidding!
– The braking lever mounted on the handle bar must always be
tight. Check regularly to ensure
Dismantle, clean and
apply grease. Check
and tighten if necessary.
brake jacket, replace
– Work on the brake system should be entrusted exclusively
if necessary
to the dealer!
Let Service check,
dismantle, clean,

Proper use of the Pedelec:

lubricate and replace
Your Pedelec has been designed and equipped like a bicycle for
if necessary
the use on public roads and paved lanes. Please bear this in
Clean, lubricate
mind when using the Pedelec under off-road conditions and in
case of overloading and improper rectification of faults.
that they are not loose,

Publicité

Table des Matières
loading

Table des Matières