Bernard Controls SQ Intelli+ Serie Instructions De Mise En Service page 48

21 ACCESSING DATA SHEET
To check settings without making changes, select check instead of change

in the menu.
Select change in the MENU and turn to OK to
confirm.
Select data sheet in the CHANGE menu and
turn to OK to confirm.
•
valve tag number
a. Select valve tag number to read or
write valve ID.
b. Use the blue selector to change the 1
character and turn to OK to confirm.
c. Change remaining characters using the
same method.
d. Turn to OK until all characters are
input and continue until the menu is
displayed again.
•
actuator number: This is the serial number
of the actuator. This information is input at
the factory and is only shown in the CHECK
menu.
•
entry code: for entering or changing a
password, see §22.
•
characteristics:
correct operation of the actuator (see
details next page).

The following data is only shown in the CHECK menu.
•
operating class: the actuator is designed for on/off operation, class
III control or class II control functions. This item can be used to
activate an alarm if the number of starts is excessive (excess. starts
alarm).
English
parameter settings for
48
DATA SHEET
return
valve tag number
actuator number
entry code
operating class
manufacture date
characteristics
st
software version
return
VALVE TAG NUMBER
MOV55VV
CHARACTERISTICS
return
motorr
locked motor/s
reverse delay/ms
ratio position system
ext gear ratio 1/
thread mm
stroke
return