Bernard Controls SQ Intelli+ Serie Instructions De Mise En Service page 29

Description of the commands
•
Local/remote replaces local/remote switch on the actuator to
enable remote control or local control from a remote location.
Turn to OK to confirm and
then select contact status
for
command:
Turn to OK to confirm.
If you just want to check settings without making changes, select

CHECK instead of CHANGE in the main menu.
•
local + remote/remote
Same as above, but this command allows local and remote modes to be
enabled at the same time.
•
local command inhibit
Local command inhibit is a remote command. This command overrides any
open or close commands made locally and enables remote commands, even
if the local/remote selector on the actuator is on local.
Turn to OK to confirm and
then choose whether to
maintain
capability.
The standard setting is for local stop and general shutdown
to remain possible on the actuator. Select local off (no) to
inhibit local stop as well.
Turn to OK to confirm and then select contact status for
performing this command (as described above).
Turn to OK to confirm.
performing this
1st choice: closed contact = remote commands
2nd choice: open contact = remote commands
local stop
English
LOCAL / REMOTE
contact (c) = remote
contact (o) = remote
LOC CMD INHIBIT
local off (yes)
local off (no)
29