Bernard Controls SQ Intelli+ Serie Instructions De Mise En Service page 28

14.2 Auxiliary remote controls
Two further remote commands are available and can be configured for the
installation.
These commands can be assigned to specific functions.
Select Change in the menu and
turn to OK to confirm.
Select commands
CHANGE menu and turn to OK
to confirm.
Select aux. command 1 or aux.
command 2. in the COMMANDS
menu and turn to OK to
confirm.
Select a command with the blue
selector.
As default, aux. command 1 is assigned to local command inhibit and aux.
command 2 to ESD close. If aux. command 1 and aux. command 2 are set to
emergency functions, aux. command 2 has priority.
English
AUX. COMMAND 1
(no assigned)
in the
(local/remote)
(local+remote/remote)
(local command inhibit)
(open inhibit)
(close inhibit)
(auto / on-off)
ESD close
ESD open
partial stroke
28