Bernard Controls SQ Intelli+ Serie Instructions De Mise En Service page 46

20 VIEWING ACTUATOR HISTORY
 To check settings without making changes, select check instead
of change in the menu.
20.1 Activity
Select change in the menu and turn to
OK to confirm.
Select activity in the CHANGE menu and
turn to OK to confirm.
Select number of starts or running time
to view total figures since the actuator
was manufactured.
The system also includes a separate
counter which can be reset by the user.
Select total to view total number of
starts.
To reset the partial counter, select reset partial and then choose yes or no
(this option is only displayed when the user is in the change menu).
starts / 12 hour: this data relates to the number of times the actuator has
started during the previous 12 hours and tells the user about recent service.
This is particularly useful when trying to establish whether the actuator has
been subjected to excessive use when performing modulating actions.
handwheel action: the handwheel has been used since the last time a
motorized movement was made.

Changes are only registered if they exceed 10% of travel
English
TEMPORIZED ZONE
return
number of starts
running time
starts last 12h
handwheel action
return
OPEN: START %
total
partial
reset partial
46