Replacing The Halogen Lamp In The Laser Slit Lamp - Zeiss VISULAS YAG III Mode D'emploi

62
Maintenance / Miscellaneous

Replacing the halogen lamp in the laser slit lamp

Warning
Before replacing the lamp, switch the system off at the key switch and
disconnect the power cable. Allow the lamp to cool down or wear
protective gloves.
• Replace the halogen lamp (3) as shown in Fig. 38.
• To unlock the lamp holder, turn the lever (5).
• Do not touch the bulb with bare fingers.
• When inserting the bulb, ensure that the lamp holder (2) is correctly
positioned in relation to the locating pins (4).
1 Halogen lamp cover
Lamp holder
2
3 12 V / 30 W halogen lamp
4 Locating pins
5 Lever
Fig. 38 Replacing the halogen lamp
000000-1354-664 VISULAS YAG III 15.08.2005