Zeiss VISULAS YAG III Mode D'emploi page 98

1 Foot switch connector
Door interlock connector
2
3 Serial port for servicing
4 Connector for combined operation with the VISULAS 532s
5 Slit lamp connector (control cable)
Slit lamp connector (high-voltage cable)
6
Power inlet connector with integrated fuses
7
Fig. 9 Control unit/connectors
Note
The cables and the corresponding sockets and ports are colour-
coded for easy identification. The sockets and ports are also
labelled.
Both connectors and sockets are marked with red dots. These
must be lined up when connecting the cables.
•
To disconnect the cables, grasp the connector by the sleeve and
pull it directly backwards. Pulling at the sleeve releases the lock
mechanism on the connector.
Caution
Only connect cables and connectors that are the same colour and size.
Never force connections.
•
Install the remote interlock contact. If you do not wish to install
an interlock, connect the yellow coding plug provided in place
of the interlock (yellow connector, 2, Fig. 9).
000000-1354-664 VISULAS YAG III 15.08.2005
Description
23