Laser Slit Lamp - Zeiss VISULAS YAG III Mode D'emploi

26
Description

Laser slit lamp

1 Laser head
2 Focus shift control
3 Fastening screw
This screw fastens the binocular tube or other component to the
microscope body.
4 Interpupillary distance scale
5 Binocular tube
6 Eyepieces
The standard equipment includes eyepieces with a magnification
of 10x. An eyepiece with a reticle can be used for taking
measurements and to aid focusing.
7 Magnification changer
8 Cover for halogen lamp
(To replace lamp, see page 62)
9 Slit length control
Variable in steps of 1 / 3 / 5 / 9 / 14 mm.
Special slit 1 x 5 mm, ± 45°, 90°
10 Slit width control (0 to 14 mm)
11 Filter selector
White line pointing up:
Full aperture combined with a heat-absorbing filter.
White line to the patient:
Blue filter for tonometry and fluorescence observations.
White line to the physician:
Red-free filter for contrast enhancement during fundus
observation.
12 Prism head
13 VISULAS 532s laser spot size controller
Note
A tonometer can be mounted to the slit lamp.
The tonometer support is mounted on the joint on the carrier
arm. The tonometer itself is attached by a magnet and fitted
only when required.
000000-1354-664 VISULAS YAG III 15.08.2005