Controls; Visulas Yag Iii Control Unit - Zeiss VISULAS YAG III Mode D'emploi

22
Description

Controls

VISULAS YAG III control unit

The control unit (2) is the central power supply and control unit for the
VISULAS YAG III and the laser slit lamp.
The control panel (5), the LASER STOP button (4) and the combined
control knob/button (3) are located on the front side of the control
unit. The VISULAS YAG III is menu operated via the buttons on the
control panel and the combined control knob/button. The combined
control knob/button is used to adjust the system parameters in the
individual operating modes by turning the knob. Pressing the button
selects the energy parameter in all modes.
The recessed grip on the top (6) is used for safe transport of the control
unit.
The key switch (1) is located on the right-hand side.
The power supply and control connectors required for operation of the
VISULAS YAG III are located on the rear panel.
1 Key switch
2 Control unit
Control knob/button
3
4 LASER STOP button
5 Control panel
6 Recessed grip
Fig. 8 VISULAS YAG III control unit
000000-1354-664 VISULAS YAG III 15.08.2005