Publicité
Les langues disponibles
Les langues disponibles
12.2
Cloning Mode in Multi-Unit Charger
You can clone radio profiles in Multi-Unit Charger (MUC).
When in cloning mode, you must have at least two radios. Identify the radios as follow:
●
A Source radio where the profiles are copied or cloned to another radio
●
A Target radio where the profiles are cloned from the source radio
The placement for Source Radio in MUC is in pocket 1, 4, 7, or 10.
The placement for Target Radio in MUC is in pocket 2, 5, 8, or 11.
Match the placement for Source and Target radios in MUC as follows:
●
1 and 2
●
4 and 5
●
7 and 8
●
10 and 11
NOTE: Read MUC pocket numbers from left to right with the Motorola Solutions logo facing front.
When pairing the Source and Target radio, use the same band type for successful cloning mode.
When cloning, the MUC does not need to be connected to a power source.
Figure 15: Cloning Mode in Multi-Unit Charger
Table 21: Cloning Mode in Multi-Unit Charger
Number
2
1
3
7
6
1
2
3
4
5
6
7
8
4
5
9
8
Item
Pocket 1
"CLONE" symbol
Pocket 2
Pocket 4
Pocket 5
Pocket 7
Pocket 8
Pocket 10
MN001132A01-AE
Chapter 12: Cloning Mode
65
Publicité
