Publicité
Les langues disponibles
Les langues disponibles
Questions
●
Question: Does the radio gives me any alert
to know that I am in still in the private queue
mode?
If I press the Top button either for Private Reply
or Direct Call and I forgot that I wanted to talk
privately and I did not push the PTT button.
●
Question: How do I respond to group conver-
sation if I have already pushed the Top Button
(for either Private Reply or Direct Call) and my
Top button LED indicator is blinking?
What happens if I am in queue to talk privately
(LED indicator blinking orange), then the person
that was transmitting finished talking and I press
the PTT button to talk but the Top button LED
indicator does not change to solid orange?
How do I know when the radio is no longer in
Private Mode conversation?
9.4
Call All Available
You can perform group call to all users available on different channels, and users who are not in an on-going
radio conversation. The Call All Available feature does not interrupt ongoing communications.
This feature is useful for users with more than one or two channels.
You have the option to program the Call All Available feature into Top button, or assign to a channel using the
Customer Programming Software (CPS).
The Call All Available feature allows a communication with all available radio users at once in a temporary
"super channel" group, without having to change through each channel individually.
You can respond to Call All Available transmission by pressing the PTT button.
When a caller initiate the Call All Available transmission, the Top button is disabled in all radios involved. The
Private Reply feature or Direct Call feature is disabled during this period.
Chapter 9: Special Radio Call Features
Descriptions
Long press the Top button to exit the private
queue mode. The Top button LED indicator turns
off. Press the PTT button to reply to the group call.
The radio lets you know you are ready for a private
communication by turning the Top button LED indi-
cator to solid orange and playing the voice prompt
"private" in the beginning. During the private con-
versation, it also plays a distinctive Talk Permit
Tone. All these different prompts from the radio
need to happen to ensure there is a private com-
munication established. If you do not have these
prompts, it means that you do not have private
communication established and you need to try
again.
You are no longer in a private conversation if the
Top button LED indicator is not illuminating solid
orange and is either blinking or switched off in-
stead. The radio plays the voice prompt "Private
Over".
NOTE: Remember that the Private Reply
and the Direct Call time out after 10 sec-
onds of inactivity in which both users are
sent back to the group call mode. Radio
plays the voice prompt "Private Over" and
the Top button LED indicator goes off.
MN001132A01-AE
39
Publicité
