Publicité
Les langues disponibles
Les langues disponibles
MN001132A01-AE
Chapter 4: Charging the Batteries
For more information, see
page 7
The red LED on the SUC illuminates to indicate that the battery is charging.
4.3
Charging the Radio and the Battery Using a DLR
12-Pocket Multi-Unit Charger—Optional Accessory
The DLR 12-Pocket Multi-Unit Charger (MUC) allows drop-in charging of up to 12 radios or up to six radios
and six stand-alone batteries. The batteries can be charged with the radios or removed and placed in the
MUC separately. Each of the 12 charging pockets can hold a radio (with or without the holster) or battery, but
not both at the same time.
Procedure:
1. Place the MUC on a flat surface.
2. Insert the power cord plug into the MUC dual pin connector at the bottom of the MUC.
3. Plug the power cord into an AC outlet.
4. Turn off the radio.
5. Insert the radio or the battery into the charging pocket with the radio or the battery facing away from
the contacts.
Result:
NOTE:
●
The MUC clones up to two radios (two source radios and two target radios). For more information,
refer to
Cloning Mode in Multi-Unit Charger on page
●
For more information on the MUC operation, refer to the instruction sheets provided with the MUC.
For more information on the parts and their part numbers, refer to
18
Charger LED Indication on page 19
and
Operational Safety Guidelines on
65.
Accessories on page
76.
Publicité
