7.3
Attaching the Holster
When and where to use:
Figure 3: Holster
Procedure:
1. To insert the radio into the holster, press the radio against the back of the holster until the hook on the
holster is inserted in the top recess.
2. To remove the radio from the holster, detach the hook of the holster from the top recess using the top
tab, and slide the radio out from the holster.
7.4
Turning the Radio On or Off
When and where to use:
●
To turn on the radio, long press the Power button until the radio plays the power-up tone, and the Tx/Rx
LED indicator blinks.
●
To turn off the radio, long press the Power button until the radio power down tone is heard, and the Tx/Rx
Indicator LED indicator turns off.
NOTE: By default, when the radio is turned on, it announces the current channel name and battery
status.
7.5
Adjusting the Volume
There are 16 increments of volume. When you press the Volume Up or Volume Down buttons, you hear a
beep at the current volume level. If your radio is receiving during volume interaction, you hear audio voice
prompt from your radio, and the new volume instead of beeps.
When and where to use:
●
Press the Volume Up button to increase the volume, or the Volume Down button to decrease the
volume.
●
To mute, press and hold the Volume Down button for two seconds until you hear "Mute" voice prompt
from your radio.
MN001132A01-AE
Chapter 7: Getting Started
25