Motorola Solutions DLR1020 Mode D'emploi page 34

MN001132A01-AE
Chapter 9: Special Radio Call Features
9.1.1
Starting Private Reply
This feature allows two people to instantly connect privately after a group transmission. The Top button is
programmed by default as Private Reply.
Procedure:
1. To capture the radio ID of the person currently talking to your group after transmission is over, press
the Top button.
2. To initiate the conversation privately, press the PTT button.
9.1.2
Private Reply Status Indicator
Table 11: Private Reply Status Indicator
Private Reply Status
Private Reply request in
queue (initiated using Top
button press)
Private conversation initi-
ated (using the PTT button)
4
Private Call notification
Private conversation in pro-
gress
End of private conversation
9.2
Direct Call
You can call a pre-determined user programmed in the radio privately. The Direct Call feature is configurable
using the Customer Programming Software (CPS).
NOTE: To configure Direct Call feature for the first time in your radio, download the CPS for free at
http://www.motorolasolutions.com/map/en_xa/dlr. Read and upload the radio IDs identified as "privates"
into the CPS. For more information, refer to
You have the option to program the Direct Call feature into the Top button, or assign to any radio channel.
Direct Call Scenario
User A presses the radio Top button to talk directly to User B. User A radio plays voice prompt "Private
<Name>" as programmed in CPS, and the Top button LED indicator starts blinking orange, indicating that
User A is in queue waiting to talk privately to User B.
4
This notification occurs only once in the beginning of the call.
34
Radio Caller/Recipient
Caller
Recipient
Recipient
Caller and Recipient
Caller and Recipient
Customer Programming Software on page
Top Button LED Voice Prompt or
Indicator
Blink Orange "Private Reply"
Solid Orange
Solid Orange
Solid Orange
Off "Private Over"
Tone
"Private TPT"
"Private"
"Private TPT"
58.