Motorola Solutions DLR1020 Mode D'emploi page 55

Figure 12: MIC Gain Setup
Number
1
2
10.2.8
Setting Home Channel
You can change your home channel setting to Disabled or Channel number (or channel name if alias was set
up in CPS). The default setting for home channel is Disabled.
Procedure:
1. Press the Channel/Menu button until your radio announces the home channel setting and prompts
you to change it.
2. To change the home channel setting, press the Volume Up button or Volume Down button.
3. To go back to the first advanced configuration option – PROFILE ID Number, press the Channel/
Menu button.
NOTE: When home channel is enabled and there is no activity detected from a channel for
seven seconds, the radio reverts to home channel. This feature may not be appropriate if you
need to frequently change channels throughout the day.
PROFILE
ID Number
Home
Maximum
Channel
Channel
MIC Gain Top Button
Description
Volume Up button or Volume Down button.
Press to change MIC Gain settings.
Channel/Menu button.
Press to continue to the next advanced config-
uration option.
MN001132A01-AE
Chapter 10: Advanced Configuration Mode
1
2
55