Publicité
Les langues disponibles
Les langues disponibles
MN001132A01-AE
Chapter 10: Advanced Configuration Mode
2. To continue to the next advanced configuration option, press the Channel/Menu button.
NOTE: To use Direct Call option, you must enable the feature in Customer Programming
Software (CPS). Otherwise Top button sounds an error tone even if you choose the option in the
menu.
Figure 11: Top Button - Sub-Menu Options
Number
1
2
10.2.7
Setting MIC Gain
You can change your Microphone (MIC) Gain setting to low, medium, or high. The default setting for MIC
Gain is medium.
Procedure:
1. Press the Channel/Menu button until your radio announces the MIC Gain setting and prompts you to
change it.
2. To change the MIC Gain setting, press the Volume Up button or Volume Down button.
3. To continue to the next advanced configuration option, press the Channel/Menu button.
NOTE: You should only change the MIC Gain setting if other users complain that the volume
from your radio is too low or too high. The default medium setting is appropriate for most users,
so it can be left unchanged.
54
Private
Direct
Reply
Call(*)
Call All
Disabled
Available
Page All
Mute
Available
Description
Volume Up button or Volume Down button.
Press to browse through the Top button option
in sub-menu.
Channel/Menu button.
Press to continue to the next advanced config-
uration option.
1
2
Publicité
