Motorola Solutions DLR1020 Mode D'emploi page 47

Chapter 10
Advanced Configuration Mode
Advanced configuration mode allows you to configure special settings in your radio without the need of
programming cables or additional software.
Advanced configuration mode allows you to customize the following features.
● PROFILE ID Number
● Maximum Channels
● Top button
● Microphone (MIC) Gain
● Home Channel
Table 16: Advanced Configuration Mode Feature Customization
Feature
PROFILE ID Number
Maximum Channels
Top button
MIC Gain
Home Channel
10.1
Entering Advanced Configuration Mode
Procedure:
To enter advanced configuration mode, press Power → PTT → Volume Up buttons at the same time.
You hear "Programming Mode. Press Menu button to continue" voice prompt from your radio.
10
Only if enabled through Customer Programming Software (CPS).
Chapter 10: Advanced Configuration Mode
Description
Choose a 4-digit number (0000–9999) as your ra-
dio PROFILE ID Number. Customize the PROFILE
ID Number to ensure interference free/private com-
munications.
Choose the maximum number of channels you
want to allow for your radio.
Set the Top button with one of the following fea-
tures: Private Reply, Direct Call
ble, Page All Available, Mute, Disable.
Choose between High, Medium, or Low MIC Gain
to adjust the radio microphone sensitivity level to fit
different users or noise environments.
Choose the channel you want to designate as your
main channel. Every time you change to a different
channel and no activity is detected from the chan-
nel, the radio reverts to your home channel.
MN001132A01-AE
10
, Call All Availa-
47