Kenwood CHEF XL KVL80 Instructions page 22

This appliance conforms to EC
l
Regulation 1935/2004 on materials
and articles intended to come into
contact with food.
This KAX950ME attachment features
the Twist Connection System
and is designed to fit directly on the
latest generation Kenwood Chef
models (identified as KVC and KVL
series).
This attachment can also fit Kmix
kitchen machines featuring a slow
speed attachment outlet (KMX
series).
To check that this attachment
is compatible with your kitchen
machine you will need to ensure
both components feature the Twist
Connection System
If your kitchen machine features
the Bar Connection System
you will also need an adaptor
before operation is possible. The
reference code for the adaptor is
KAT001ME. For more information
and how to order the adaptor visit
www.kenwoodworld.com/twist.
Use the food mincer to process
meat, poultry and fish. Use the
inclusive attachments to shape
sausages and kebbe.
before using for the first time
Wash the parts see 'care and
l
cleaning'
.
3
key
Food mincer
spanner
1
ring nut
2
screens: fine, medium and coarse
3
cutter
4
scroll
5
body
6
feed tube
7
tray
8
pusher/storage unit for kebbe &
9
sausage adaptors
pusher lid
bk
dish/cover
bl
to assemble the food
mincer
1 Fit the scroll
5
body.
2 Fit the cutter
4
outermost
1
properly – otherwise you
could damage your mincer.
3 Fit a screen
3
the locating pin
Use the fine screen for raw meat;
l
fish; small nuts; or cooked meat for
shepherd's pie or meat loaves.
Use the medium and coarse screens
l
for raw meat; fish and nuts.
4 Loosely fit the ring nut.
to use the food mincer
1 Lift off the slow speed outlet cover
by pressing the top and lifting off
2 With the attachment in the position
shown, locate to the slow speed
outlet and rotate to lock in place
3 Tighten the ring nut firmly by hand.
If you experience poor results when
l
mincing meat, switch off and unplug
the appliance. Dismantle and clean
the attachment, then re-assemble
the attachment and refit to the
power unit. Tighten the ring nut
using the spanner provided
4 Fit the tray
8
under the mincer to catch food.
inside the mincer
– cutting side
. Ensure it's seated
. Put the notch over
.
2
5
. Put the dish/cover
.
3
.
4
.