Publicité
THROTTLE OVERRIDE SYSTEM (T.O.R.S.) CHECK
2
3
All manuals and user guides at all-guides.com
1
SDN2230
2-12
THROTTLE OVERRIDE SYSTEM (T.O.R.S.)
CHECK
WARNING
When checking T.O.R.S.:
•
Be sure the parking brake is applied.
•
Be sure the throttle lever moves smoothly.
•
Do not run the engine up to the clutch engage-
ment speed. Otherwise, the machine could
start moving forward unexpectedly, which
could cause an accident.
1. Start the engine.
2. Hold the pivot point of the throttle lever away
from the throttle switch by putting your thumb
(above) and forefinger (below) between the
throttle lever pivot 1 and stop switch housing
2.
While holding as described above, press the
throttle lever 3 gradually.
The T.O.R.S. will operate and the engine should
run between 2,800 and 3,000 r/min.
WARNING
If the engine does not run between 2,800 and
3,000 r/min, stop the engine by turning the main
switch to the "OFF" position and check the elec-
trical system.
INSP
ADJ
Publicité
