Publicité
All manuals and user guides at all-guides.com
AIR BLEEDING (HYDRAULIC BRAKE SYSTEM)/
SDN2520
DRIVE CHAIN
NOTE:
If bleeding is difficult, it may be necessary to let
the brake fluid settle for a few hours.
Repeat the bleeding procedure when the tiny
bubbles in the system have disappeared.
•
Add brake fluid to the proper level.
Refer to "BRAKE FLUID LEVEL INSPECTION".
WARNING
After bleeding the brake system, check the brake
operation.
DRIVE CHAIN
Oil level inspection
WARNING
The engine and muffler will be very hot after the
engine has run. Avoid touching a hot engine and
muffler while they are still hot with any part of
your body or clothing during inspection or repair.
1. Place the machine on a level surface.
2. Remove:
•
Exhaust silencer
Refer to "EXHAUST ASSEMBLY" in CHAP-
TER 5.
3. Check:
•
Oil level
Checking steps:
•
Remove the dipstick 1 and wipe it off with a
clean rag.
Reinsert the dipstick.
2-26
INSP
ADJ
Publicité
