Stryker 1188HD Mode D'emploi page 46

Guidance and Manufacturer's Declaration: Electromagnetic Immunity
1188HD Camera is intended for use in the electromagnetic environment specified below.
The customer or the user of 1188HD Camera should ensure that it is used in such an environment.
(a) Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast, and TV broadcast,
cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to
fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field
strength in the location in which the 1188HD Camera system is used exceeds the applicable RF
compliance level above, the 1188HD Camera system should be observed to verify normal operation. If
abnormal performance is observed, additional measures may be necessary, such as reorienting or
relocating the 1188HD Camera unit.
(b) Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
Recommended Separation Distances Between Portable and Mobile RF Communications
The 1188HD Camera system is intended for use in an electromagnetic environment in which radiated
RF disturbances are controlled. The user of the 1188HD Camera system can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the 1188HD Camera system as recommended below,
according to the maximum output power of the communications equipment.
Rated maximum output
power (W) of transmitter
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance (d) in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects, and people.
EN-42
All manuals and user guides at all-guides.com
Equipment and the 1188HD Camera System
Separation distance (m) according to frequency of transmitter
150 kHz to 80 MHz
d = 1.17 P
0.12
0.37
1.17
3.70
11.70
the transmitter manufacturer.
80 MHz to 800 MHz 800 MHz to 2.5 GHz
d = 1.17 P
0.12
0.37
1.17
3.70
11.70
d = 2.33 P
0.23
0.74
2.33
7.37
23.30