Publicité
Les langues disponibles
Les langues disponibles
Setting Up the Camera Head
1.
Connect the camera head to the console.
• Unscrew the soaking cap from the cable connector if necessary.
• Align the blue arrow on the cable connector with the blue arrow on
the camera-connector port on the front console panel (see Figure 4).
• Push in the connector until it locks in place.
Figure 4:
Connecting the camera head to the console
Note
To unplug the camera from the control unit, grasp the knobbed
portion of the connector and pull straight out.
Caution
Do not severely bend the camera cable or damage may result.
Setting Up the Coupler
1.
Attach the coupler to the camera head.
• Grasping the rear adapter, screw the coupler onto the camera head
(clockwise) until it forms a tight seal (see Figure 5).
Figure 5:
Attaching a coupler to the camera head
All manuals and user guides at all-guides.com
EN-17
Publicité
