Ambu aBox 2 Mode D'emploi page 17

2) Press Network setup
3) Press the ON/OFF slider to turn on Wi-Fi
4) If required by your organization's Wi-Fi network, press the input
field next to Hostname
Note: The hostname is provided by your organization's IT
administrator and is used for identifying the displaying unit on the
Wi-Fi network. The hostname can be 1-63 characters long excl. dots
and can consist of numbers and upper- or lowercase letters (A-Z/
a-z). Hyphens cannot be used as first or last character.
5) Press Configure
5
for available networks.
6.1.1. Wi-Fi network with
WPA/WPA2 authentication
1) Select the Wi-Fi network
from the list.
2) Enter the password and press
Save , then press Connect.
6
3) When the connection has been
established, a Wi-Fi symbol
appears in the Toolbar.
4) To enable automatic connection
to this Wi-Fi press the Connect
automatically
7
(switch to green).
6.1.2. Hidden Wi-Fi network
(Wi-Fi not showing on the list
of available Wi-Fi connections)
1) Press Add network
2) Press the input field next to SSID and enter
the name of the hidden Wi-Fi network,
then press OK.
3) Enter the remaining information in the
input fields depending on the type of
Wi-Fi network.
6.1.3. Wi-Fi network with WPA2
Enterprise authentication
(username and password
required)
1) Enter username in the Identity
field.
9
2) Enter password in the Password
field.
10
3) Select the required certificate
4) Press Connect
12
5) When the connection has been established,
a Wi-Fi symbol appears in the Toolbar.
6) To enable automatic connection to this
Wi-Fi, press the Connect automatically
ON/OFF slider (switch to green).
13
6.1.4. Import network certificate for
WPA2 (TLS -transport security layer)
In the Network menu, scroll to Imported
Network certificates
2 .
and enter the hostname.
4
and wait while the displaying unit searches
ON/OFF slider
.
8
.
11
.
.
14
3 (switch to green).
5
2
1
3
4
7
6
8
13
9
10
11
12
14
17