Heidolph Hei-TORQUE Expert Serie Notice D'instructions page 68

Operation
Device activation via PC
WARNING
• If the device is activated via a connected PC, note the possibility of a
• Ensure that any contact with rotating parts is prevented effectively even
• Secure the device accordingly with a clearly visible warning sign and
The Hei-TORQUE Ultimate type devices provide two serial interfaces at the back of the
housing:
–
1 × USB Micro type AB (according to USB 2.0 spec. only up to max. 500 mA
–
1 × RS232 SUB D9
Use each of these interfaces to connect the device to a PC for external activation.
A PC can be used to activate up to four overhead stirrers.
Use the 1 m long USB interface cable supplied. If a longer cable is used
there is a risk of transmission errors!
For external activation of the overhead stirrer, the freely available
Hei-CONTROL software must be installed on the used PC. The applica-
tion can be downloaded from our homepage:
➜
A detailed description of the software and driver installation and all infor-
mation on the system requirements can be found in the Hei-CONTROL
operating instructions, Ref. 01-005-005-69; download:
➜
Connection setup
➜
Ensure that all software and driver components on the PC are installed correctly and that
the PC is switched on.
➜
Switch on the overhead stirrer. The software detects the device automatically.
➜
As soon as the communication connection between the PC and overhead stirrer is made,
the overhead stirrer operates in remote mode. Make the necessary operating settings in
the software.
In remote mode the overhead stirrer is controlled via the software on the
connected PC.
On the overhead stirrer, only the swipe field for stopping the rotational
movement and the main switch are actively switched!
start-up unexpected by third parties!
when activated devices are at a standstill.
take further ambient-specific protective measures if necessary.
www.heidolph-instruments.com / Service / Downloads / Software
www.heidolph-instruments.com / Service / Downloads / Operation
manuals
68