General notes
The described product may only be operated by authorized and instructed personnel. Training
and qualification of the operating personnel as well as ensuring that the product is operated
with responsibility are the sole responsibility of the operator!
Transportation
During transportation, avoid strong vibrations and mechanical stresses that can cause damage
to the product. Keep the original packaging in a dry and protected place for later use.
Storage
Always store the product in its original packaging. To protect against damage and dispropor-
tionate material aging, store the device in a dry environment that is as temperature-stable and
dust-free as possible.
Recommended storage conditions:
•
5 °C – 31 °C up to 80 % rel. humidity
•
32 °C – 40 °C up to 50 % rel. humidity (decreasing linearly)
Acclimatization
After each transportation and after storage under critical climatic conditions (e.g. high
temperature difference between inside and outside), allow the product to acclimatize at room
temperature for a minimum of two hours to prevent possible damage from condensation before
putting it into operation in the place of use. If necessary, extend the acclimatization phase if
the temperature differences are very high.
Make all supply connections only after the product has been acclimatized!
Permissible ambient conditions
CAUTION
The product is not suitable for outdoor use!
The product is not suitable for use in potentially explosive atmospheres!
Permissible ambient conditions for operation:
•
5 °C – 31 °C up to 80 % rel. humidity
•
32 °C – 40 °C up to 50 % rel. humidity (decreasing linearly)
•
Maximum height above sea level: 2,000 m
When used in corrosive atmospheres, the life of the product may be reduced depending on the
concentration, duration and frequency of exposure.
46