Publicité
Les langues disponibles
Les langues disponibles
Operation
Calibrate the torque as follows:
➜
Make sure that the device has warmed up sufficiently.
➜
Start the rotational movement and then tap the [
panel:
➜
The calibration process is completed as soon as the
appears on the display. The [
MEM
➜
The [
] symbol is hidden on stopping and restarting the rotational movement.
Reset the torque as follows:
➜
Stop the rotational movement and press the [
value to the factory setting.
➜
The device is reset as soon as the [
On calibration to a relative zero point, the torque is displayed with a
positive or negative sign during the course of the process. This depends
on the change in viscosity after the calibration.
On calibration to an absolute zero point, the torque is generally displayed
with a positive sign during the course of the process. This depends on the
actual viscosity of the sample.
The torque changes depending on the rotational speed, i.e. recalibration
is generally necessary after a speed adjustment.
The calibration value is reset to the factory setting automatically on
switching off the device.
Device menu
The Hei-TORQUE Ultimate type devices offer a range of setting options that can be called up
via the Device menu.
Menu
➜
Use the [
] function button on the control panel to open the Device menu:
➜
Turn the push-and-rotary control to select the required menu item or value in the open
submenu (font color changes to orange).
➜
Press the push-and-rotary control to confirm an input.
Cal
MEM
] symbol is shown on the display continuously.
Cal
] function button to reset the calibration
MEM
] symbol disappears.
63
] function button on the control
Torque calibrated
message
Publicité
