Publicité
Les langues disponibles
Les langues disponibles
Commissioning
Set up the device
The described overhead stirrers can be mounted on a stand or on a wall grid. Any necessary
mounting materials are available as accessories, see www.heidolph.com.
Follow the safety instructions below:
WARNING
Risk of injury, risk of damage to property due to fall or tilting
If assembled improperly, the device can also fall or tip over when
unloaded!
• If the overhead stirrer is mounted on a wall grid, ensure that the wall
• When mounting the overhead stirrer on a stand, make sure that the
After assembly of the overhead stirrer, check all screw connections /
clamping screws for tight fit.
grid and all mounting elements have sufficient self-protection and load
capacity!
setup is sufficiently stable.
–
The stand may only be set up on a stable surface.
–
When mounting on a stand, follow the specific setup instructions
for the stand.
–
Always align the overhead stirrer so that the quick-action chuck
vertically faces the notional centerline between the long stand
base bars, see following figure:
54
Publicité
