Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed including
the following:
1. Read all instructions.
2. Never power the Marine Sharpening Station
• A lways make sure that the power cord is disconnected and the power port cover is in
place when the sharpener is exposed to wet conditions. Your Marine Sharpening Station
is only water resistant when the power port cover is in place.
• B efore you connect either power cord, make sure that the sharpener is on a stable and
dry work surface. Although the sharpener is water resistant, it is not meant to be used in
wet conditions
3. Make sure that only items to be sharpened with the Marine Sharpening Station 710 are
clean and free of debris.
4. Unplug from outlet and close the power port cover when not in use, before putting on or
taking off parts and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner.
U.S. customers: You may return your sharpener to EdgeCraft's factory for service where the
cost of repair or electrical or mechanical adjustment can be estimated. When the electrical
cord on this appliance is damaged, it must be replaced by the Chef'sChoice distributor or
other qualified service to avoid the danger of electrical shock.
Outside the U.S.: Please return your sharpener to your local distributor where the cost of
repair or electrical or mechanical adjustment can be estimated. If the supply cord of this
appliance is damaged, it must be replaced by a repair facility appointed by the manufac-
turer because special tools are required. Please consult your Chef'sChoice distributor.
7. CAUTION! "This appliance may be fitted with a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only
one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not modify the plug in anyway."
8. The use of attachments not recommended or sold by EdgeCraft Corporation may cause fire,
electric shock, or injury.
9. The knife sharpener portion of Chef'sChoice
knives, kitchen knives, pocket knives and most sports knives. Do not attempt to sharpen ax
blades or any blade that does not fit freely in the slots.
10. Do not let the cord hang over edge of table or counter or touch hot surfaces.
11. When in the "ON" position (switch is to the left when "on") the Chef'sChoice
should always be on a stable countertop or table.
All manuals and user guides at all-guides.com
™
when it is being exposed to wet conditions.
®
Model 710 is designed to sharpen fillet
2
®
Model 710
Publicité
