Publicité
Les langues disponibles
Les langues disponibles
Lighting
•
Once your regulator is connected, open up the gas from
your propane tank.
Warning
Do not look directly into the mouth of the oven while
lighting, as flames may escape from the oven opening.
•
Push the control knob in and slowly turn counter-
clockwise from 12 o'clock to 9 o'clock. This should take
at least 3 seconds as you allow gas to flow into the oven.
When the gas control passes 9 o'clock, there will be a click
of ignition. Continue to push in the control knob for 5
seconds after ignition and then release.
Push, slowly turn and
hold for 5 seconds to light
GR21514-Koda 12 - 28mbar-LIT Essentials guide-CAN-PA-A000D1.indd 13
GR21514-Koda 12 - 28mbar-LIT Essentials guide-CAN-PA-A000D1.indd 13
What to do if the flames go out?
Our priority is for you to enjoy Koda 12 in a safe and fun
environment. To ensure this, Koda 12 has a Flame Safe Device
(FSD) built in. This means, if the flame is extinguished while
the gas supply is on, the FSD will automatically cut off the gas
supply into Koda 12.
If you notice that the flames have gone out, turn off the gas
supply at the tank and detach from Koda 12.
Warning
Leave gas to dissipate for 5 minutes before relighting.
Max. power
Min. power
Off
13
28/01/2022 13:18
28/01/2022 13:18
Publicité
