Publicité
Les langues disponibles
Les langues disponibles
INSTALLATIoN oNTo BoILER
Installation onto boiler is carried out with the mounting console on the following way:
1. Place the console on the designated place of installation and mark the holes for cable
inlets and screws.
2. Cut the openings for cable inlets and drill the holes for screws.
3. Fasten the console with supplied screws.
4. Assemble the base with console and fix it with supplied screws. Bring the sensor cables
through left opening, capillary of safety temperature limiter through the centre opening and
power supply cables through the right opening.
Installation manual
69
Publicité
