Publicité
Les langues disponibles
Les langues disponibles
Settings for the first heating circuit:
Para-
Parameter name
meter
P2.1
HEAT CURVE STEEP-
NESS
P2.2
PARALLEL SHIFT OF
HEATING CURVE
P2.3
DURATION OF BOOST
HEATING
P2.4
ROOM TEMPERATURE
INCREASE BY BOOST
HEATING
Settings for the second heating circuit:
Para-
Parameter name
meter
P3.1
HEAT CURVE STEEP-
NESS
P3.2
PARALLEL SHIFT OF
HEATING CURVE
P3.3
DURATION OF BOOST
HEATING
P3.4
ROOM TEMPERATURE
INCREASE BY BOOST
HEATING
P3.5
HEAT CURVE STEEP-
NESS FOR ADDITIONAL
DIRECT CIRCUITS
P3.6
PARALLEL SHIFT OF
HEATING CURVE FOR
ADD. DIRECT CIRCUITS
Settings for domestic hot water:
Para-
Parameter name
meter
P4.1
D. H. W. TEMPERATURE
IN OFF PERIOD
Parameter description
Heating curve steepness indicates what temperature is
required for the heating bodies by a determined outdoor
temperature.
See chapter Heating curve.
Setting of parallel shift of heating curve or calculated
stand-pipe temperature.
Use this setting to eliminate deviation between actual and
required room temperature.
Duration of boosted room temperature by changeover
from night to day heating period.
Boost room temperature increase by changeover from
night to day heating period.
Parameter description
Heating curve steepness indicates what temperature is
required for the heating bodies by a determined outdoor
temperature.
See chapter Heating curve.
Setting of parallel shift of heating curve or calculated
stand-pipe temperature.
Use this setting to eliminate deviation between actual and
required room temperature.
Duration of boosted room temperature by changeover
from night to day heating period.
Boost room temperature increase by changeover from
night to day heating period.
Setting of heat curve steepness for additional direct
heating circuits.
Parallel shift of heating curve for additional heating
circuits.
Values 16 ÷ 90 set directly the boiler temperature when
additional direct heating circuit is activated.
Parameter description
Setting of d. h. w. temperature in OFF program timer
interval.
37
Setting range
Default
setting
0,2 ÷ 2,6
0,7 - floor
1,0 - radia-
tors
-15 ÷ 15 °C
0
0 ÷ 200 min
0
0 ÷ 8 °C
3
Setting range
Default
setting
0,2 ÷ 2,6
0,7- floor
1,0- radia-
tors
-15 ÷ 15 °C
0
0 ÷ 200 min
0
0 ÷ 8 °C
3
0,2 ÷ 2,6
1,2
-15 ÷ 15 °C
16 ÷ 90 °C
6
Setting range
Default
setting
4 ÷ 70 °C
4
Service setting manual
Publicité
