Publicité
Les langues disponibles
Les langues disponibles
GRAPhIC LCD DISPLAy
On the LCD display we can look up all the important data for the controller operation.
DESCRIPTIoN AND PRESENTATIoN oF ThE BASIC SCREEN:
Time and date.
Operation
mode.
Active
functions.
Temperatures, protection
functions and other data.
Review of data on the screen:
In the middle of the screen are displayed operation mode and active user functions. To
switch between heating circuits and the screen with the hydraulic scheme review use the
button.
Temperatures, active outputs, protection functions and other data appear in the bottom
section of the screen. To review temperatures and other data, use buttons
The number of sensors and other data displayed on the screen depends on the selected
hydraulic scheme and controller settings.
If you wish to retrieve the requested data after using the keyboard, look for
the data with buttons
for 2 seconds.
If you press the
change from a single line review into a double line review or vice versa. In
the two-line temperature review, the measured temperature appears in the
first line, and the requested or the calculated temperature appears in the
second line.
State of the controller's outputs.
Messages
and
warnings.
and
, then confirm it by pressing the
button for 2 seconds, the temperature review will
13
Measured temperatures.
T1=20
T5=45
T2=-5
T4=45
T6=53
R 23 5
1 4 6
and
T7=--- °C
T8=--- °C
.
button
User manual
Publicité
