Publicité
Les langues disponibles
Les langues disponibles
Floor drying profile - default setting:
F1.2
°C
50
40
30
20
10
5
0
DEFAULT SETTINGS
The menu contains the tools to help you set the controller.
RESET OF CONTROLLER PARAMETERS
Resets all parameter settings P1, P2, P3, P4, P5, P6, S1 (except S1.1), S2, S3, S4, S5, S6 and F
to factory set values.
RESET OF TIME PROGRAMS
Deletes the set time programs and retrieves factory set time programs.
RESET OF CONTROLLER AND RE-START OF THE FIRST SETTING
Restores all parameters to default values and restarts the controller initial setup.
SAVE USER SETTINGS
Saves all controller settings as a safety copy.
LOAD USER SETTINGS
Uploads all controller settings from the safety copy. If a safety copy doesn't exist, this command
is not executed.
Before executing the commands listed above, the controller requires a confir-
mation of the selected command.
Service setting manual
F1.5
10
15
F1.8
F1.11
20
25
54
Days
30
Publicité
