Publicité
Les langues disponibles
Les langues disponibles
CoNTRoLLER INSTALLATIoN
Install controller in dry indoor area away from strong electromagnetic fields.
The controller is foreseen for wall installation or boiler panel installation with standard
cutout of 138 x 92 mm.
wALL INSTALLATIoN
The installation onto a wall is carried out in the following way:
1. Unscrew both screws (a) from controller (b) and remove it from the base (c).
2. Remove the capillary of a safety temperature limiter (d) from the base. Put the base on
the wall, align it with the built-in level vial and mark the drilling holes.
3. Drill the holes and insert the wall sockets.
4. Fasten the base to the wall with supplied screws and carry out electrical connection. At
the end put controller (b) back to the base and fasten it with the screws (a).
INSTALLATIoN MANUAL
67
Installation manual
Publicité
