Porsche 7PP.971.675.J Manuel Technique page 33

Les langues disponibles

Basic Wall Mount

Attaching control unit to wall mount

Fig. 7: Attaching the control unit

1. Route the vehicle cable through the lower

opening of the basic wall mount, place the

bottom of the control unit on the locking tab and

engage towards the rear.

2. Route the mains cable through the upper opening

in the basic wall mount and engage the locking

ring to the left.

3. Insert the vehicle plug in the connector fastener.

Vehicle Charge Port

For information on connecting and disconnecting the

vehicle cable to and from the vehicle charge port and

for the charging and connection status at the vehicle

charge port:

f Refer to the Driver's Manual.

Operating Instructions