Porsche 7PP.971.675.J Manuel Technique page 27

Overview of Charger
Fig. 1: Overview of charger
A
Supply cable (pluggable to control unit)
B
Plug of the supply cable on the control unit
C
Power plug for connecting to the mains supply
D
Vehicle plug (connector plug for the vehicle)
E
Vehicle cable (permanently installed on control unit)
F
Control unit
Operating Instructions
NOTICE
Risk of damage to the charger.
e Always place the charger on a solid surface
when charging.
e Porsche recommends that the charger be placed
in the basic wall mount during operation.
Depending on the country, e.g. in Switzerland
the charger may only be operated in the basic
wall mount.
f Refer to chapter "Basic Wall Mount" on
page 31.
e Do not immerse the charger in water.
e Protect the charger against snow and ice.
e Protect the charger against potential damage
due to being driven over, dropped, pulled,
bent or crushed.
1) Time of printing. Further information is available from
your Porsche partner.
The charger must only be operated within a
temperature range from –30 °C to +50 °C.
Information
– To prevent overheating during operation,
avoid continuous exposure of the charger to
direct sunlight. In the event of overheating
of the control unit, charging is interrupted
automatically until the temperature has
returned to the normal range.
– When driving abroad, always carry the appro-
1)
,
priate supply cable for the country you are visiting
with you.
– Depending on the country, different safety
concepts with various device versions are
stipulated. Before travelling abroad, ensure that
operation of the charger is permissible in the
relevant country. Further information is available
from your Porsche Partner and from your local
power supplier.
Vehicle Charge Ports and Vehicle
Plugs
Different vehicle charge ports A and vehicle plugs B
are available depending on the vehicle equipment.
Operating Instructions
DE
EN
FR
IT
ES
PT
NL
SV
FI
DA
NO
EL
CZ
HU
PL
HR
SK
SL
ET
LT
LV
RO
BG
25