Sygonix 1559246 Notice D'emploi page 84

Deleting user codes:
User codes can be deleted if you want to prevent a user from accessing the door (e.g. when an
employee changes departments or leaves the company).
You can also overwrite existing user codes with a new code.
Proceed as follows:
• The combination lock must be in programming mode (see section 12. a) for details).
• Enter the programming code for output #1 or #2:
Output 1
Output 2
• Enter a memory slot number.
.....
.....
• Press the button to confirm your entry. The combination lock will beep twice and the
middle LED will flash two times to indicate that the user code of the corresponding memory
slot has been deleted.
Example 1:
To delete user code in memory slot no. 22 for output #1:
(a) (b) (c)
(a) Select output #1
(b) Memory slot number = 22 (possible for output #1 is 00 - 99)
(c) Deletes the code (the lock will beep twice and the middle LED will flash two times)
Example 2:
To delete user code in memory slot no. 5 for output #2:
(a) (b) (c)
(a) Select output #2
(b) Memory slot number = 5 (possible for output #2 is 0 - 9)
(c) Deletes the code (the lock will beep twice and the middle LED will flash two times)
84
100 memory slots for output 1
10 memory slots for output 2