Sygonix 1559246 Notice D'emploi page 83

User code examples:
(a) (b)
(a) The programming code for output #1
(b) Code number = 00 (you can choose from 00 - 99)
(c) User code = 1111
(d) Saves the code (the lock will beep twice and the middle LED will flash two times)
(a) (b)
(a) The programming code for output #2
(b) Code number = 0 (you can choose from 0 - 9)
(c) User code = 2222
(d) Saves the code (the lock will beep twice and the middle LED will flash two times)
Function in normal mode:
To activate output #1 or #2, ensure that the combination lock is in normal mode (not program-
ming mode), enter the user code, and then press the
See section 12. h) for instructions on how to set the activation duration for outputs #1 and #2.
You do not need to press the
tion 12. m). The combination lock activates the corresponding output when the correct
user code is entered.
When "Auto entry" mode is enabled, each code must be the same length (e.g. if the
master code is 5 digits, the user codes must also be 5 digits).
(c) (d)
(c) (d)
Output #1 is activated
Output #2 is activated
button.
button when "Auto entry" mode is enabled (see sec-
83