Switching The Flashing Led Indicator On/Off - Sygonix 1559246 Notice D'emploi

n) Switching the flashing LED indicator on/off
In normal mode, the combination lock waits for the user code to be entered or for a signal from a
transponder. The left LED flashes once every second to indicate that the lock is in normal mode.
This LED indicator can be turned on or off as desired.
Proceed as follows:
• The combination lock must be in programming mode (see section 12. a) for details).
• Enter programming code
• Select the desired function.
LED indicator is switched off
LED indicator is switched on (default setting)
• Press the button to confirm your entry. The combination lock will beep twice and the mid-
dle LED will flash two times to indicate that the setting has been saved.
100
.