Sygonix 1559246 Notice D'emploi page 110

Step 6: Create a user code for output #2
Enter the following key combination:
(a) (b) (c) (d)
(a) Output #2 should be activated
(b) Memory slot number = 0 (for output #1 choose from 0 - 9)
(c) User code = 5555
(d) Saves the code (the lock will beep twice and the middle LED will flash two times)
Step 7: Activate output #2 for 15 seconds
(a) (b) (c)
(a) Start programming for output #2
(b) Duration "15" = Activates the output for 15 seconds when a valid user code (or visitor code)
is entered
(c) Saves the setting (the lock will beep twice and the middle LED will flash two times)
Step 8: Exit programming mode
• Briefly press the key.
• T he combination lock will beep twice and the middle LED will flash. The combination lock is
now in normal mode.
110