Sygonix 1559246 Notice D'emploi page 72

• Use the "BACK-LIT" jumper (H) to configure the button backlight settings:
- "AUTO": The backlight switches on at full brightness when a button is pressed and switch-
es off automatically after 10 seconds of inactivity.
- "FULL": The backlight stays on at a low brightness and switches to full brightness when
a button is pressed. After 10 seconds of inactivity, the backlight dims automatically and
stays constant.
• Attach the combination lock to the mounting plate, ensuring that the cables do not become
trapped.
• To fix the combination lock in place, insert the two mounting screws and tighten them using
the L-shaped tool provided.
72