These modes can only be used with the door opener button, not to activate the output
with a user code.
If the door opener button is released too early when selecting modes
internal timer will be reset and output #1 will not be activated.
For safety reasons, instructions should be placed next to the door opener button. For
example, if the delay is set to 5 seconds, the instructions should inform the user to
hold down the door opener button for at least 5 seconds.
• Press the
button to confirm your entry. The combination lock will beep twice and the mid-
dle LED will flash two times to indicate that the setting has been saved.
102
or
, the