Ambu aView Mode D'emploi page 5

CAUTIONS
1. Have a suitable backup system readily available for immediate use so the procedure
can be continued if a malfunction should occur.
2. US federal law restricts this device for sale only by, or on the order of, a physician.
3. Keep aView dry during preparation, use and storage.
4. Pay attention to the battery symbol indicator on the aView monitor. Recharge aView
when the battery level is low (see section 4.1). It is recommended that aView is
recharged before every procedure and that a charger be readily available during use.
5. Place or hang the aView monitor on a stable support while in use. Dropping aView
could damage it.
6. Position the power cord where it is unlikely to be stepped on. Do not place any
objects on the power cord.
7. aView is not intended to be repaired. If defect aView shall be discarded.
8. The batteries in aView are not changeable and must only be removed upon disposal.
2. System Description
The aView monitor can be connected with a range of Ambu visualisation devices (cf. section
2.2 for compatible devices) to display the video image from an Ambu visualisation device. The
aView monitor is reusable. No modification of this equipment is allowed.
Ambu® aView™
For aView model no., please check backside label on aView.
aView is not available in all countries. Please contact your local sales office.
Power supplies
Accessories
Part numbers:
405002000
Model no.
JANUS2-W08-R10
(SW versions v2.XX)
x5
(e.g. for attaching
Bracket
the aView
to an I.V. pole)
aView power supply
manufacturer:
FSP Group Inc.
aView power supply part
number: FSP030-REAM
aView adaptor
cable for composite
connection
Part numbers:
405017700
Part numbers:
EU/CH 405014700X
(not DK & UK)
UK 405013700X
DK 405012700X
AUS & NZ
405015700X
US 405016700X
Part numbers:
405000712
5