Ambu aScope 4 Cysto Mode D'emploi page 6

2.2. Product compatibility
The aScope 4 Cysto have been designed to be used with:
Endoscopic accessories and instruments
• Irrigation set (line and sterile water or saline bag) with Luer connection.
• Syringe and other Luer connecting accessories.
• Endoscopic instruments labelled for use in a minimum working channel size of (ID)
2.0 mm / 6.0 Fr or less*.
• Holmium YAG laser (2.1 microns wavelength).
• High frequency electrosurgical equipment fulfilling EN 60601-2-2. To keep high frequency
leakage currents within allowed limits, the maximum sinus peak voltage level of the
electrosurgical unit shall not exceed 2.2 kVp.
* There is no guarantee that instruments selected solely using this minimum working channel
size will be compatible in combination. Compatibility of selected instruments should be tested
before the procedure.
Contrast agents and lubricants
• Iodine based (30 g) contrast agent suitable for cystoscopy.
• Water based soluble lubricants suitable for cystoscopy.
Other equipment
• X-ray.
2.3. aScope 4 Cysto parts
2 1
No. Part
1 Handle
2 Control lever
3 Working channel entry
- Working channel
4 Insertion cord
5 Bending section
6 Distal end
4-5-6 Insertion portion
7 Connector on the
aScope 4 Cysto cable
8 aScope 4 Cysto cable
9 Protection pipe
6
3
Function
Suitable for left and right hand.
Moves the distal end up or down in a single plane.
Allows for instillation of fluids and insertion of
endoscopic instruments.
Can be used for instillation of fluids and insertion
of endoscopic instruments.
Flexible insertion cord.
Manoeuvrable part.
Contains the camera, light source (two LEDs), as well as
the working channel exit.
The ensemble of insertion cord, bending section,
and distal end.
Connects to blue socket on Ambu displaying units.
Transmits the image signal to Ambu displaying units.
Protects the insertion cord during transport and
storage. Remove before use.
8 7
9
4 5 6