Table des Matières
Publicité
Track guide
Verify the wear of the track guide by measuring the width of the
guide. If dimensions of the guide illustrated in Figure 27 are
less than 5 mm, at any place, replace the part. If the guiding
strips are so worn that the concave shape is no longer visible,
replace the part. An overly worn track guide could prematurely
wear the other components of guidance of the system.
Figure 27
Track
Verify the wear of the track by inspecting the rolling path, the
driving lug, the profile and the internal and external condition of
the track's carcass. Make sure that the track's internal structure
are not visible at cuts or worn area. Too much wear could cause
damage to the wheels and to the track guide.
WEAR
52
Publicité
Table des Matières
