Table des Matières
Publicité
Alignment
Parallelism must be adjusted with the ATV on the ground,
driving forward on about 3 m [10 ft] and measuring toe-in
distance. Refer to Figure 15.
NOTE: Every time the measurement has to be verified, drive in reverse,
then, drive forward again on about 3 m [10 ft].
NOTE: Verify condition of the steering system components before
adjusting parallelism. Damaged components can prevent proper
adjustment and impair good operation of the system
Figure 15
Dimension A: Represents the distance between the outer front
idler wheels.
Dimension B: Represents the distance between the outer back
idler wheels.
A - B = ± 3 mm [1/8 in]
ADJUSTMENTS
26
Publicité
Table des Matières
