Polaris PROSPECTOR PRO 2014 Manuel De L'utilisateur page 20

INSTALLATION, REMOVAL AND RE-INSTALLATION
Re-installation
Always clean wheel hubs on the ATV before installing wheels or
track systems.
Figure 2
NOTE: Clean wheel hubs.
• Re-install track systems at the rear.
• Re-install track systems at the front.
• Tighten fasteners in criss-cross pattern to the
manufacturer's recommended torque specification.
• Verify track tension. Adjust if required.
• Verify angle of attack. Adjust if required.
• Verify alignment. Adjust if required.
17